序号 |
器具名称 |
功能作用 |
1 |
含水率检测仪 Moisture tester |
检测混凝土基面的含水率,以确定是否适合施工 Check concrete surface moisture to determine applicability |
2 |
拉拔实验仪 Pull-off tester 回弹仪 Rebound hammer |
检测混凝土基面的粘结强度 Check cohesive strength of concrete substrate 检测混凝土基面的抗压强度 Check compressive strength of concrete substrate |
3 |
抛丸(喷砂)机 Shot blasting machine |
对混凝土基面进行糙化处理,最理想的处理工具 Roughen concrete substrate, optimal preparation tool |
4 |
无尘研磨机 Dust-free grinding machine |
对混凝土基面进行糙化处理 Roughen concrete substrate |
5 |
铣刨机 Scarifier |
快速清除不需要之旧涂层等,并使基面糙化 Quick-remove old coatings, also for surface roughening |
6 |
抹光机(环氧砂浆用) Trowelling machine ( Mortar application ) |
施工环氧砂浆,抹平,压实,以期达到最佳强度 For epoxy mortar application, provide level, dense and high strength mortar floor |
7 |
高压无气喷涂机 High-pressure airless sprayer |
涂层地坪面层进行喷涂施工,获得最佳的外观 Spray top coat paint to gain optimal appearance |
8 |
切缝机 Joint cutter |
整齐切开所设伸缩缝并填充弹性体 Cut joint to receive elastic filler |
9 |
镘刀 Trowel |
施工厚涂层 Apply thick coat |
10 |
各种滚筒 Roller |
针刺滚筒:消泡 Spike roller : remove bubble 纹理泡沫滚筒:纹理状面层 Textured roller : achieve textured finish 长毛滚筒:拉毛,底涂 Long pile roller : primer application 短毛滚筒:面涂 Short pile roller : top coat application |
11 |
清洗机 Cleaning machine |
清洗已完工面层并进行养护 Clean finished top coat surface and start curing |
12 |
电阻机(兆欧表) Electrical resistance tester |
测定涂层的导电性能 Check conduction property of the coat |
13 |
温湿度计,表面温度计 Thermo-hygrometer, surface thermometer |
测定施工环境的湿度,测定欲涂基面的温度 Check environmental temperature, humidity and coated surface temperature |